Replacing uPVC Window Handles
It is easy to change the handles on upvc windows. It is crucial to ensure that the new handle fits into the spindle cutouts in the window mechanism.
If the steps below are followed correctly the cockspur handle will be able to fit into most windows. The step height of the handle is important.
What to Look for
Over time, uPVC handles on many windows in the UK begin to show signs wear and tear. The handle on the window may become shaky or difficult to operate when this occurs. This is a relatively simple job that can be accomplished by anyone who is comfortable with basic hand tools.
The first step is to make sure that the handle is securely fixed to the frame of the window in its open position. The next step is to find the fixing pins or screws that keep the handle in position. They are usually located on the inside face of the handle. They can be removed using a screwdriver or pliers.
Once the handle has become loose, gently pull it away from its hinges. Then, you'll need to locate a new handle of the same size and style. This can be accomplished online or at the local DIY store and it should take five minutes using an screwdriver.
When replacing the handle of a uPVC handle, it is important to consider the step height. This is the distance between the handle's base and the place it is located in the frame of the window. This is a standard measurement and you should check the height of the step before purchasing an replacement handle.
There are a variety of sizes based on the kind of handle. Inline handles are offered for uPVC windows that have centers of 31mm for lugs, while cockspur handles come with centers of lugs of 43mm. Tilt-and-turn handles are common on uPVC windows. They have a specific design which allows the window be slid down to let in air, and then turned to fully open the window.
The most frequent uPVC handle cracks are internal, instead of a break at the base. This makes it difficult to open. It is essential to ensure that any replacement handle is fitted with the same spindle as your original one.
Remove the Old Handle
Incorrectly installed or damaged window handles can cause your double glazed windows to open or close in a way that isn't correct and may result in them becoming stuck. This can be caused by various factors, including general wear and tear on the metal handle or corrosion. In these situations, it is important to seek replacement upvc window handles as soon as you can to avoid further damage and loss of function.
One of the first things that you should do when replacing the handles on your windows made of upvc is to remove the old handle from the window. To do this, start by getting rid of the screw that is covered when the handle is in a closed position. Once you have removed that screw, you are able to remove the handle. It is a good idea to employ an electric screwdriver to accomplish this as it will make the task much easier and quicker.
It is also worth noting that the screws on the handle may be hidden behind caps made of plastic, so it is recommended to take an Stanley knife to the screw caps and then remove them. After door handle repairs near me have removed the old handle, you will have to examine the square cutout on the base to ensure that the new handle you choose for the window lock is compatible. This is important because you'll need to measure the length of the spindle on the previous handle to make sure it matches the size of the window mechanism and handle spindle cut out.
There are three types of Upvc handles: Espag handles with a central screw that can be turned left or right and Cranked handles with two screws and Spade handles, which have flat arms and can be used either side of the windows made of upvc. Once you have found a suitable replacement, it is simple to screw the handle in place and making sure that the spindle is correctly fitted into the lock mechanism. Once you have done this you can tighten the handle onto the window frame. Your replacement upvc handles should now be secured.
Take a measurement of the Spindle
If you're replacing a upvc window handle that has come off, it's likely due to the spindle that holds it in place is loose or damaged. In some instances, this could be fixed by using screws or pins to secure it. In other cases it will require replacement completely. There are several different types of handles made of upvc. These include inline espagnolette handles, cockspur handles, and tilt and turn handles. Each type of handle is mounted and replaced in a different manner.
Before purchasing a replacement handle it's important to know the size of the existing one. This will ensure that the handle fits the window properly and will be of the correct size. Luckily, all handles conform to industry standards of sizing making it quite easy to locate the correct size.
To measure the size of the handle you must turn the window to the open position. You should be able to determine the size of the screw or pin that holds the handle. Use a ruler or a tape measure to determine the length the spindle is. Once you have the length of your spindle, it is possible to purchase a replacement that is exactly the same size.
The step height of a upvc window handle is also a factor to take into consideration when you are buying a replacement. The step height is measured from the base to the point at which the handle sits on the frame. Typically, this is around 21mm for uPVC windows or 9mm for aluminium. To ensure that the new handle will work it, you can drop something into the space to check the distance it will go before it comes into contact with an obstruction.
Cockspur handles may have different backsets based on the type of window you put them in. Inline espag handle heights are 43mm from centre to centre (two fixing points). Cockspur handles have different backsets depending on the type of window they are located in. This is due to the fact that they have a spur which extends from their handle and locks onto a cockspur wedge striking plate.
Fit the New Handle
When you've chosen a new handle, make sure you align it with the screw holes on the door and secure it with the screws supplied. If you're also replacing the latch lever, it can be installed the same way as the door handle. After that, attach the door trim to conceal the mounting screws and close the job.
Tips: To remove the metal head from the wooden wedge Hold the handle so that its broad end rests on the floor. Then use an hammer to tap the thin end of the handle. Be careful not to scratch the handle or spindle.